Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #6

Edição por Andrew Bookholt

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Disconnect both of the following cablesconnectors from the logic board:
[* black] Disconnect both of the following cablesconnectors from the logic board:
[* red] Left fan cable.
[* orange] Inverter cable.
[* icon_caution] Be sure to pull only parallel to the face of the logic board, as pulling up on the socket will break it off the logic board.
[* icon_note] When pulling these connectors away from their sockets, it is helpful to use your fingernails to pull on the ears at each side of the connector.