Pular para o conteúdo principal

Alterações no passo #4

Edição por Olivia Wolf

Edição aprovada por Olivia Wolf

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_note] Carefully undo the ribbon wire for the fingerprint scanner before fully removing the backing.
[* black] There are 2two 3.4mm Philips J00 screws that hold the wire in place, one may be under a lock sticker. You will be using a J00 Phillips screwdriver to remove the screws.
[* black] There are 2two 3.4mm Philips J00 screws that hold the wire in place, one may be under a lock sticker. You will be using a J00 Phillips screwdriver to remove the screws.