Alterações no passo #1

Edição por david amirahmadi

Edição aprovada por david amirahmadi

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* blackred] Remove all 9 of the 3mm Phillips #000 screws from the digitizer.
[* black]
Remove the digitizer like you did with the back cover by working your way around the edge and peeling it up.
[* red] Phillips Screws, Size #000
[* blackred] Remove all 9 of the 3mm Phillips #000 screws from the digitizer.
[* black]
Remove the digitizer like you did with the back cover by working your way around the edge and peeling it up.
[* red] Phillips Screws, Size #000