Ir para o conteúdo principal

Alterações no passo #2

Edição por Jennifer Zakaria

Edição aprovada de Jennifer Zakaria

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* red] Turn the device 180 degrees so the screw in the suction cupEasyPort Mount compartment is on top.
[* black] Remove the 2mm screw beneath the suction cupEasyPort Mount compartment with the Torx T-5 head Screwdriver.
[* red] Turn the device 180 degrees so the screw in the suction cupEasyPort Mount compartment is on top.
[* black] Remove the 2mm screw beneath the suction cupEasyPort Mount compartment with the Torx T-5 head Screwdriver.