Skip to main content

Alterações no passo #1

Edição por Jennifer Zakaria

Edição aprovada by Jennifer Zakaria

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Position the device so that the underside is facing up.
[* black] Tilt the suction cupEasyPort Mount slightly upward and rotate it counterclockwise 180 degrees from it's initial position.
[* black] Firmly grab the suction cupEasyPort Mount and remove it.
[* icon_note] If it does not dislodge easily, gently twist the suction cupEasyPort Mount, applying increasing pressure until it does.
[* black] Tilt the suction cupEasyPort Mount slightly upward and rotate it counterclockwise 180 degrees from it's initial position.
[* black] Firmly grab the suction cupEasyPort Mount and remove it.
[* icon_note] If it does not dislodge easily, gently twist the suction cupEasyPort Mount, applying increasing pressure until it does.