Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #1

Edição por Adam O'Camb

Edição aprovada por Adam O'Camb

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Handling the board by the edges, flip the logic board over to access the PRAM battery.
[* icon_note] The PRAM battery is secured by a spring contact and two small plastic nubs.
[* black] On the side between the two plastic nubs (opposite the spring contact), gently slide an opening pick in between the battery socket wall and the battery.
[* black] Use the opening pick to slide the battery away from the two plastic nubs.
[* black] Once the battery's edge clears the two nubs, use the opening pick to tilt the battery up out of its socket.