Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #1

Edição por Adam O'Camb

Edição aprovada por Adam O'Camb

Antes
Depois
Sem alteração

Linhas de Passo

[* icon_note] The PRAM battery is secured by a spring contact and two small plastic nubs.
[* black] Gently pushOn the side between the two plastic nubs (opposite the spring contact), gently slide an opening pick in between the battery socket wall and the battery.
[* black] Use the opening pick to slide
the battery away from the two plastic nubs. (This puts increased pressure on the spring contact at the other end.)
[* black] Once the battery's edge clears the two nubs, use the opening pick to tilt itthe battery up out of its socket.
[* black] Gently pushOn the side between the two plastic nubs (opposite the spring contact), gently slide an opening pick in between the battery socket wall and the battery.
[* black] Use the opening pick to slide
the battery away from the two plastic nubs. (This puts increased pressure on the spring contact at the other end.)
[* black] Once the battery's edge clears the two nubs, use the opening pick to tilt itthe battery up out of its socket.