Conserte seus objetos Comunidade Loja

Alterações no passo nº 10

Edição por Tarun Thiruma —

Edição aprovada por Tarun Thiruma

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Apply a moderate amount of high concentration (>90%) isopropyl alcohol underneath the screen assembly's left edge, near the top of the device.
-[* black] Wait ~5 minutes to allow it to penetrate and weaken the adhesive.
+[* black] Apply a small amount of high concentration (>90%) isopropyl alcohol underneath the screen assembly's left edge, near the top of the device.
+[* black] Allow the device to sit upright on its right edge for ~5 minutes to allow it to penetrate and weaken the adhesive.