Conserte seus objetos Comunidade Loja

Alterações no passo nº 4

Edição por Tarun Thiruma —

Edição aprovada por Tarun Thiruma

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Slide your tool all along the right side of the device to release the clips and adhesive securing the screen assembly.
- [* icon_caution] As you separate the lower part of the right edge, you should encounter the two metal clips mentioned previously. If you do not see or feel these clips in the way, you are only separating the top half of the assembly! If so, press the screen back down into place and start again from the beginning of the screen removal process.
+[* black] Slide your opening pick all along the right side of the device to release the clips and adhesive securing the screen assembly.
+ [* icon_caution] As you separate the lower part of the right edge, you should encounter the two metal clips mentioned previously. If you do not see or feel these clips, you are only separating the top half of the assembly! If so, press the screen back down into place and start again from the beginning of the screen removal process.