Alterações no passo nº 5
Edição por Tarun Thiruma —
Edição aprovada por Tarun Thiruma
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Once the screen assembly's right edge is separated, slide your pick around the bottom right corner of the device so it is underneath the bottom edge of the assembly. | |
| [* black] Slide the tool all along the bottom edge of the phone to slice through the adhesive securing the screen assembly and release the plastic clips. | |
| + | [* icon_note] These plastic clips should snap free much easier than the metal ones you released earlier. |
| [* black] Leave your tool underneath the bottom edge of the screen assembly to prevent it from re-adhering to the frame. Continue to the next step with a new tool. |