Alterações neste passo
Edição por Matt Falcon —
Edição aprovada por Tarun Thiruma
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Place the phone on a flat surface with the screen facing up. | |
| [* black] Insert the flat end of a nylon spudger into the crease separating the screen and the body in the lower right corner of the phone. | |
| [* black] Pry open part of the screen by pulling the tool and the screen toward you. | |
| [* icon_note] You may be required to use a heating element, such as the [guide|11677|iOpener], to heat and loosen the adhesive underneath before attempting to pry it open. | |
| + | [* icon_caution] The screen is made of two layers of components - and ***if you pull up the wrong one, you can easily ruin the display***, as there is a thin ribbon cable also at the bottom-right corner connecting the two layers. Dig deep and pull up the frame with the screen together. |