Alterações neste passo
Edição por Kristen Gismondi —
Edição aprovada por Kristen Gismondi
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Place the phone on a flat surface with the screen facing up. | |
| [* black] Insert the flat end of a nylon spudger into the crease separating the screen and the body in the lower right corner of the phone. | |
| [* black] Pry open part of the screen by pulling the tool and the screen toward you. | |
| - | [* icon_note] You may be required to use a heating element, such as the iOpener, to heat and loosen the adhesive underneath before attempting to pry it open. |
| + | [* icon_note] You may be required to use a heating element, such as the [guide|11677|iOpener], to heat and loosen the adhesive underneath before attempting to pry it open. |