Conserte seus objetos Comunidade Loja

Alterações neste passo

Edição por Kristen Gismondi —

Edição aprovada por Kristen Gismondi

Antes
Depois
Sem alteração

Linhas do passo

[* black] Place the phone on a flat surface with the screen facing up.
-[* black] Insert the flat end of a spudger tool into the crease separating the screen and the body in the lower right corner of the phone.
+[* black] Insert the flat end of a nylon spudger into the crease separating the screen and the body in the lower right corner of the phone.
[* black] Pry open part of the screen by pulling the tool and the screen toward you.
-[* icon_note] You may be required to use a heating element, such as the iOpener tool, to heat and soften the edges of the screen before attempting to pry it open.
+[* icon_note] You may be required to use a heating element, such as the iOpener, to heat and loosen the adhesive underneath before attempting to pry it open.