Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #4

Edição por Andrew Bookholt

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Use a wrench to remove the boiler hose from the pump manifold.
[* red] Remove the two slotted screws securing the pump brackets to the frame of the Barista.
[* icon_note] The simple angled plasticstiff rubber pump brackets are designed to absorb the vibrationsvibration from the reciprocating pump.
[* icon_note] The simple angled plasticstiff rubber pump brackets are designed to absorb the vibrationsvibration from the reciprocating pump.
[* black] Disconnect the two female AC power spade connectors from the pump and slip the thermal fuse out from its holder on the body of the pump.
[* icon_note] The thermal fuse is a normally closed protective switch whose resistance becomes infinite once the pump has reached a critical temperature, thus shutting it down before reaching a temperature at which damage will occurthe coil burns up.
[* icon_note] The thermal fuse is a normally closed protective switch whose resistance becomes infinite once the pump has reached a critical temperature, thus shutting it down before reaching a temperature at which damage will occurthe coil burns up.