Alterações no passo nº 3
Edição por Andrew Optimus Goldheart —
Edição aprovada por Andrew Optimus Goldheart
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Use a plastic opening tool to flip up the retainer securing the |
|---|---|
| + | [* black] Use a plastic opening tool to flip up the retainer securing the upper component board cable connector to its socket on the logic board. |
| [* black] Pull the connector away from its socket on the logic board. | |
| [* icon_caution] Do not lift the cable upward as you disconnect it. |