Conserte seus objetos Comunidade Loja

Alterações no passo nº 3

Edição por Andrew Optimus Goldheart —

Edição aprovada por Andrew Optimus Goldheart

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Use the edge of a plastic opening tool to flip up the retainer securing the control board cable connector to its socket on the logic board.
+[* black] Use a plastic opening tool to flip up the retainer securing the control board cable connector to its socket on the logic board.
[* black] Pull the connector away from its socket on the logic board.
[* icon_caution] Do not lift the cable upward as you disconnect it.