Ir para o conteúdo principal

Alterações no passo #12

Edição por Arthur Shi

Edição aprovada por Arthur Shi

Antes
Depois
Sem alteração

Linhas de Passo

+[* black] Hold the motherboard by the corners and maneuver it out of its recess, being careful not to snag any cables.
+[* icon_reminder] During reinstallation, be sure to route both antenna cables [https://d3nevzfk7ii3be.cloudfront.net/igi/qgbrU6qDQuZgef1s|underneath the motherboard edges, and direct them through the cable notches|new_window=true].
+[* icon_reminder] The fingerprint sensor connector can be tricky to reconnect during reinstallation.
+ [* black] [https://d3nevzfk7ii3be.cloudfront.net/igi/k2KwEjWISmgmvolJ|Bend the fingerprint sensor cable slightly|new_window=true] so that it bows upward near the connector.
+ [* black] [https://d3nevzfk7ii3be.cloudfront.net/igi/WatlyIvxHvEAFSGS|Stand the motherboard up|new_window=true] and position it such that the connector rests against the socket.
+ [* black] [https://d3nevzfk7ii3be.cloudfront.net/igi/21MVFrhjLagGjwlh|Use your finger to carefully align the connector and press it into the socket.|new_window=true] ***Do not use excessive force!*** If done correctly, the socket should hold the connector securely.
+ [* icon_note] If you are having a difficult time, [https://www.ifixit.com/Guide/Google+Pixel+XL+Fingerprint+Sensor+Replacement/117381#s228047|follow this guide], which removes the fingerprint sensor from its indention before attaching it to the motherboard.

Imagem 1

Nenhuma imagem anterior

Adicionado

Imagem 2

Nenhuma imagem anterior

Adicionado