Alterações no passo nº 2
Edição por 101 Tech USA —
Edição aprovada por 101 Tech USA
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] This step is for those who wish to remove the front rail system. Which is unnecessary for further steps but good to know. | |
| - | [* red] To do so, first removing the hex screw on the top of the rail. |
| + | [* red] To do so, first removing the 3mm hex screw on the top of the rail. |
| [* black] Next pull back on the Delta-Ring as shown in the third picture. Remove the lower section of the rail first and then the upper section of the rail. |