Alterações no passo nº 6
Edição por Haatef Pourmotabbed —
Edição aprovada por Haatef Pourmotabbed
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Jet cleaning | |
| [* black] Remove the adjustment needle retaining clip. | |
| - | [* black] Remove both adjustment needles while counting the turns required for the removal. |
| + | [* black] Remove both adjustment needles while counting the number of turns required for the removal. |
| [* black] Clean and reinstall the needles, turning the same number of turns that were counted in the previous step. | |
| [* black] Replace the retaining clip. |