Alterações no passo nº 2
Edição por Haatef Pourmotabbed —
Edição aprovada por Haatef Pourmotabbed
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Removing Covers | |
| - | [* red] Remove top cover screws (3) using #6 flat head screw driver on the chainsaw T-wrench |
| - | [* orange] Loosen the 1/4" nuts holding the bar cover in place using the |
| - | [* blue] Turn chain tension adjustment screw two turns counter clockwise |
| - | [* orange] Remove nuts holding bar cover in place then remove bar |
| - | [* yellow] |
| + | [* red] Remove top cover screws (3) using a #6 flat head screw driver on the chainsaw T-wrench. |
| + | [* orange] Loosen the 1/4" nuts holding the bar cover in place using the chainsaw T-wrench. |
| + | [* blue] Turn the chain tension adjustment screw two turns counter clockwise. |
| + | [* orange] Remove the nuts holding the bar cover in place, and then remove the bar. |
| + | [* yellow] Remove fly wheel cover using a 5/32" Allen wrench. |