Conserte seus objetos Comunidade Loja

Alterações no passo nº 1

Edição por Dario DiMascio —

Edição aprovada por Dario DiMascio

Antes
Depois
Sem alteração

Linhas do passo

-[* red] The WiFi card is just below the fan with a white coaxial cable and a black coaxial cable attached.
-[* black] Using ESD safe blunt nose metal tweezers, grab just behind the brass connection on the white coaxial cable attached to the WiFi card.
-[* black] Carefully lift up and forward to disconnect the wire.
-[* black] Repeat both procedure one and two to remove the black coaxial cable.
+[* red] Locate the WiFi card. It is just below the fan and has a white coaxial cable and a black coaxial cable attached to it.
+[* black] Grab the section of the white coaxial cable behind the brass connection using ESD safe blunt nose metal tweezers.
+[* black] Carefully lift up and forward to disconnect the white coaxial cable from the WiFi card.
+[* black] Repeat the previous two bullet points to disconnect the black coaxial cable from the WiFi card as well.