Alterações no passo nº 3
Edição por Flora Peterson —
Edição aprovada por Flora Peterson
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* red] Locate the white and brown wiring that connects to the digitizer and the screen. | |
| [* black] Cut through clear part of tape attached to the brown latch and white wiring. | |
| - | [* black] Disconnect the wiring, by lifting the brown latch with the blue opening tool and pulling the white wire at the same time. |
| + | [* black] Disconnect the wiring, by lifting the brown latch with the blue plastic opening tool and pulling the white wire at the same time. |
| [* black] Lift off digitizer. If you need to replace the digitizer stop here and replace this part | |
| [* black] If you need to replace the screen then continue. |