Alterações no passo nº 1
Edição por Shafaq Hasan —
Edição aprovada por Shafaq Hasan
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Make sure the door is completely closed. push up from the bottom to remove the pin from the bracket that connects the barrel to the door frame and release the door closer barrel. | |
| - | [* red] NOTE: If the pin is under too much tension, open the door about an inch and slide the open clip against the barrel and repeat step 1. |
| + | [* red] NOTE: If the pin is under too much tension, open the door about an inch and slide the open clip (metal washer that keeps the screen door open) against the barrel and repeat step 1. |