Ir para o conteúdo principal

Alterações na Power Drill Chuck Replacement Introdução

Edição por Thomas Opsomer

Edição aprovada por Thomas Opsomer

Antes
Depois
Sem alteração
Introduction
The chuck on a drill is often the first part to wear out or break. Luckily, replacing it is a fairly easy process that does not normally require disassembly of the drill.
Even if the spindle or gearbox of your drill needs replacing - which does require disassembly - it's best to remove the chuck before disassembling the housing.
This guide should help you to replace the chuck on almost any corded or cordless drill, as drill chucks are almost always attached to the spindle by a screw thread. By far the most common thread size is 1/2" x20tpi UNF, but smaller drills can have a 3/8" or even smaller thread.
In some rare cases such as angle drills, very old models or large machines, the chuck may be mounted on a tapered shank or it may even have a proprietary fitting requiring disassembly of the housing. In those cases, this guide is not applicable. When in doubt, refer to the technical documentation for your make and model.
Time Required Min
5 minutos
Time Required Max
15 minutos
Imageid
Antes
Depois
Difficulty
Moderate
Easy
Conclusion
To reassemble your device, follow these instructions in reverse order.
Public
Sim
Não
Summary
This guide will help you to replace the chuck on almost any corded or cordless drill.

Ferramentas

  • Phillips #2 Screwdriver (or other size that fits the retaining screw) x1 added.
  • 6-in-1 Screwdriver (or other size that fits the retaining screw) x1 added.
  • 19mm Open End or Combination Wrench x1 (or other size that fits the spindle) added.
  • 22mm Open End or Combination Wrench x1 (or other size that fits the chuck) added.
  • 10mm Allen Wrench x1 added.
  • Soft Mallet x1 preferably plastic or wood faced added.
  • Hammer x1 added.
  • Hook Spanner x1 added.
  • Pipe Wrench x1 added.

Peças

  • Power Drill Chuck x1 added.
  • Threadlocker x1 added.

Passos

Step #: 1
Antes
Depois
Step #: 2
Antes
Depois
Step #: 3
Antes
Depois
Step #: 4
Antes
Depois
Step #: 5
Antes
Depois
Step #: 6
Antes
Depois
Step #: 7
Antes
Depois
Step #: 8
Antes
Depois
Step #: 9
Antes
Depois
Step #: 10
Antes
Depois