Ir para o conteúdo principal

Alterações na iPhone 7 Plus Home/Touch ID Sensor Replacement Introdução

Edição por Jeff Suovanen

Edição aprovada por Jeff Suovanen

Sem alteração
Home Button
Home/Touch ID Sensor
iPhone 7 Plus Home Button/Touch ID Sensor Replacement
Use this guide to replace the home button on an iPhone 7 Plus. To maintain the touch ID function after a display replacement, you will need to transfer the home button from your old display into the new display.
Follow the steps in this guide to replace the home/Touch ID sensor assembly, including the gasket and cable, in your iPhone 7 Plus.
Note that for security reasons, the original Touch ID sensor is paired to your iPhone's logic board at the factory—so, replacing the sensor with a new one will cause the loss of fingerprint sensor functions.
To avoid accidentally straining or tearing the display cables, it's best to completely detach the display assembly before beginning repairs on the home/Touch ID sensor. But if you are comfortable doing so, you may skip the display assembly section of this guide and go straight to the home/Touch ID sensor section.
iPhone 7 Plus home button replacement guide
Replace the solid-state home button in your iPhone 7 Plus.

Pré-requisitos de Guia


  • P2 Pentalobe Screwdriver iPhone - Archived x1 added.
  • iOpener x1 added.
  • Suction Handle x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • Spudger x1 added.
  • Tri-point Y000 Screwdriver x1 added.
  • Tweezers x1 added.