Ir para o conteúdo principal

Alterações na How to clean LOCA from between the LCD screen layers (Sony Xperia Z3) Introdução

Edição por Antti Immonen

Edição aprovada por Antti Immonen

Antes
Depois
Sem alteração
dispositivo
[ … ]Sony Xperia Z3
Type
[ … ]technique
Title
[ … ]How to clean LOCA from between the LCD screen layers (Sony Xperia Z3)
Introduction
[ … ]On the contrary to the popular beliefs, there's not really anything special about taking apart LCD screens. You just need to make sure you can put the layers back in in the correct order, and to be able to leave as little traces and dirt in between them. For some screens you have to desolder the backlight, which might sound intimidating to some, but isn't too difficult either with a bit of microsoldering experience.
Time Required Min
Nenhuma estimativa
Time Required Max
Nenhuma estimativa
Imageid
Antes
Depois
Difficulty
Moderate
Conclusion
[ … ]To reassemble your device, follow these instructions in reverse order.
Author
Public
Não
Summary
[ … ]I'm just showing a teardown of sorts for the Z3 LCD screen that was flooded by LOCA. After disassembling the screen and wiping the layers clean, the screen looked pretty good, but not completely clean as opposed to a new screen.

Sinalizadores

  • In Progress added.
  • Member-Contributed Guide added.

Passos

Step #: 1
Antes
Depois