Ir para o conteúdo principal

Alterações na How to clean LOCA from between the LCD screen layers (Sony Xperia Z3) Introdução

Edição por Antti Immonen

Edição aprovada por Antti Immonen

Antes
Depois
Sem alteração
Introduction
On the contrary to the popular beliefs, there's not really anything special about taking apart LCD screens. You just need to make sure you can put the layers back in in the correct order, and to be able to leave as little traces and dirt in between them. For some screens you have to desolder the backlight, which might sound intimidating to some, but isn't too difficult eithereither, with a bit of microsoldering experience.
On the contrary to the popular beliefs, there's not really anything special about taking apart LCD screens. You just need to make sure you can put the layers back in in the correct order, and to be able to leave as little traces and dirt in between them. For some screens you have to desolder the backlight, which might sound intimidating to some, but isn't too difficult eithereither, with a bit of microsoldering experience.
Time Required Min
45 minutos
Time Required Max
45 minutos
Difficulty
Moderate
Difficult