Pular para o conteúdo principal

Alterações em Ryobi P202 Motor Replacement Introdução

Edição por Joseph Eckstein

Edição aprovada por Joseph Eckstein

Sem alteração
[ ]This guide details the process of removing the motor assembly from the drill. This includes the chuck. This requires removing all of the internal electronics from the drill case. Due to the tight constraints of the wiring within the drill, reassembling the drill may require use of a spudger to push the wires out of the way of the case.
Time Required Min
10 minutos
15 minutos
Time Required Max
15 minutos
25 minutos
[ ]Replacement of the motor assembly.


  • T10 Torx Screwdriver x1 added.