Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações na HP Photosmart Plus B210a Printhead Cleaning (Gentle) Introdução

Edição por Nick

Edição aprovada por Nick

Antes
Depois
Sem alteração
Introduction
If your HP B210a has a clogged printhead, this guide can be used to try and clear the clog. '''IMPORTANT:''' While there are no guarantees this will'''''IMPORTANT: This does not fix the problem 100% of the time,every printer. If your printer has predisposed hardware problems, this will fix most printers. The printhead must also be recoverable for this to work (Ex: No predisposed issues that render it beyond repair).not work.''''' '''''If this does not work, it's generally betterthe problem persists, your printer has a different problem or a bad printhead. It is typically more cost efficient to replace the printer; not the printhead.''''' [ … ]printer as an entire unit if this happens.''''' === Guide Notes === * '''''WARNING: THIS PROCEDURE MAY DAMAGE PRINTHEADS WITH PREDISPOSED DAMAGE.'''''OTHER DEFECTS!''''' ** If the printhead has failed, it likely had predisposed damage. * This guide is primarily made for the HP Photosmart Plus B210a, it is universal among all HP 564 printers.printers, as the same method can be used on other models. ** '''Models with non-removable printheads'''''Non-removable printhead models (Ex: Photosmart 6520) require special attention to preserve the calibration. These models may not work again if this is lost and SETUP cartridges are expected.'''expected.''''' ** If I have not tested your specific printer with the bypass, I cannot guarantee calibration preservation. It generally doesn't hurt to try (removable only), but I cannot guarantee it will work without testing.work. === Printhead bypass validated models === * Photosmart C6380 * Photosmart Premium C309g * Photosmart Plus B209a * Photosmart Plus B210a
If your HP B210a has a clogged printhead, this guide can be used to try and clear the clog. '''IMPORTANT:''' While there are no guarantees this will'''''IMPORTANT: This does not fix the problem 100% of the time,every printer. If your printer has predisposed hardware problems, this will fix most printers. The printhead must also be recoverable for this to work (Ex: No predisposed issues that render it beyond repair).not work.''''' '''''If this does not work, it's generally betterthe problem persists, your printer has a different problem or a bad printhead. It is typically more cost efficient to replace the printer; not the printhead.''''' [ … ]printer as an entire unit if this happens.''''' === Guide Notes === * '''''WARNING: THIS PROCEDURE MAY DAMAGE PRINTHEADS WITH PREDISPOSED DAMAGE.'''''OTHER DEFECTS!''''' ** If the printhead has failed, it likely had predisposed damage. * This guide is primarily made for the HP Photosmart Plus B210a, it is universal among all HP 564 printers.printers, as the same method can be used on other models. ** '''Models with non-removable printheads'''''Non-removable printhead models (Ex: Photosmart 6520) require special attention to preserve the calibration. These models may not work again if this is lost and SETUP cartridges are expected.'''expected.''''' ** If I have not tested your specific printer with the bypass, I cannot guarantee calibration preservation. It generally doesn't hurt to try (removable only), but I cannot guarantee it will work without testing.work. === Printhead bypass validated models === * Photosmart C6380 * Photosmart Premium C309g * Photosmart Plus B209a * Photosmart Plus B210a
Conclusion
If your printer is working correctly, it was just caused by a clog. Printers with persistentPersistent issues have a deeper issue and should be replacedusually total out the printer as a complete unit.
If your printer is working correctly, it was just caused by a clog. Printers with persistentPersistent issues have a deeper issue and should be replacedusually total out the printer as a complete unit.

Peças

  • Distilled Water x1 Used to clean the printhead. (featured) added.
  • Small bowl x1 May get stained permanently. added.
  • Shop Towels Can be substituted with paper towels x1 Used the dry the printhead before installation. added.
  • High Content Rubbing Alcohol x1 Only use on difficult clogs. added.
  • Distilled Water x1 Used to clean the printhead when hot. (featured) removed.
  • Small bowl x1 Used to unclog the printhead. A disposable bowl is recommended as any ink stains may never come out. removed.
  • Shop Towels x1 Used the dry the printhead before installation; can be substituted with paper towels. removed.
  • High Content Rubbing Alcohol x1 Used to clear difficult clogs removed.