Ir para o conteúdo principal

Alterações na iMac Intel 27" EMC 2639 Stand Replacement Introdução

Edição por tff

Edição aprovada por tff

Antes
Depois
Sem alteração
Introduction
The late 2012 and 2013 27" iMacs had to be ordered with a VESA mount because they did not have the removable stand. However, there is a third party VESA adaptor available, which I successfully installed. I took a few pictures as I did it.
If you have the tools to get to the point where you can see the stand (through the iFixit guide mentioned), then you'll have the tools necessary to remove the stand. There are two possible exceptions. I found a flexible shaft 'screwdriver' (really a torx-driver) very handy (see step 2). Also, I used a metal file to modify the VESA mount adaptor mentioned in the parts list (see step 6).
Yes, I'm guessing this will probably void your warranty. Here's my personal take on Apple products and warranties: if it works when I get it, it's unlikely to have a warranty issue within the warranty time-frame. This comes from experience with between a dozen and 2 dozen Apple products - so, many, but not hundreds.
I'm sorry, I don't have any experience with 21in iMacs, so I don't know if this will work with them or not.
Public
Não
Sim

Ferramentas

  • iMac Intel 27" EMC 2546 and EMC 2639 Adhesive Strips x1 added.
  • Plastic Cards x1 added.
  • Spudger x1 added.
  • TR10 Torx Security Screwdriver x1 added.
  • iFixit 1/4" Screwdriver Bits x1 added.
  • T5 Torx Screwdriver x1 added.
  • TR9 Torx Security Screwdriver x1 added.

Peças

  • VESA mount adaptor x1 added.