Pular para o conteúdo principal

Alterações em Disassembling Buffalo MiniStation External Hard Drive (Thunderbolt & USB 3) Introdução

Edição por spaceshipdev

Edição aprovada por spaceshipdev

Excluído
Adicionado
Sem alteração
dispositivo
[ ]Buffalo MiniStation
Type
[ ]disassembly
Thing
[ ]External Hard Drive (Thunderbolt & USB 3)
Title
[ ]Disassembling Buffalo MiniStation External Hard Drive (Thunderbolt & USB 3)
Introduction
This is a great little external drive, but I have been having difficulty in getting a connection through the USB cable. I thought it might be the cable but wanted to take a look inside, and being a curious too I guess; wanted to see what was under the hood in this thing. [ … ] I have to say, this was an easy job to begin with (they all are right), taking the Buffalo MiniStation apart is not that difficult a task but getting it back together was a lessons learned, hopefully this guide will prevent you from making a similar mistake.
Time Required Min
45 minutos
Time Required Max
45 minutos
Difficulty
Difficult
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
Não
Summary
[ ]Removal of hard drive and get at the logic board.

Ferramentas

  • Heavy-Duty Spudger x2 added.
  • Phillips #2 Screwdriver x1 added.
  • Anti-Static Mat x1 added.

Sinalizadores

  • In Progress added.
  • Member-Contributed Guide added.