Conserte seus objetos Comunidade Loja

Histórico da introdução: Blueair 311 Auto: Disassembly and disconnection of ionizer

Edição por photocyte —

Edição aprovada por photocyte

Antes
Depois
Sem alteração
Dispositivo
Household
Type
disassembly
Title
Blue Air 311 Auto: Disassembly and disconnection of ionizer
Introduction
The Blueair 311 Auto air filter has a built in high voltage ionizer. The high voltage ionizer presumably greatly increases the performance of the filter with very small (smoke-like) particles. But, if you are concerned about the long term health and indoor air quality impact of the ionizer, but want to still use the filter otherwise, follow this guide to disassemble, internally disconnect & disable the high voltage ionizer, and then reassemble the filter.
Time Required Min
10 minutos
Time Required Max
10 minutos
Difficulty
Easy
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
photocyte
Public
Não

Ferramentas

  • Phillips #2 Screwdriver x1 added.

Sinalizadores

  • In Progress added.
  • Community-Contributed Guide added.

Passos

Passo nº: 1
Antes
Depois
stepid 341209 stepid 341209