Histórico da introdução: TicWatch E3 Motherboard Replacement

dispositivo	TicWatch E3
Type	replacement
Thing	Motherboard
Title	TicWatch E3 Motherboard Replacement
Introduction	Use this guide to replace the motherboard in your TicWatch E3. You’ll need replacement adhesive when reassembling the device. Your device will function normally, but will most likely lose its IP (Ingress Protection) rating.
Time Required Min	20 minutos
Time Required Max	40 minutos
Imageid	Antes Depois
Difficulty	Moderate
Conclusion	Compare your new replacement part to the original part—you may need to transfer remaining components like the watch buttons or remove adhesive backings from the new part before you install it. ***To reassemble your device, follow these instructions in reverse order.*** During reassembly, apply new adhesive where it's necessary after cleaning the relevant areas with isopropyl alcohol (>90%). Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]]. Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Ask/TicWatch+E3|TicWatch E3 answers community] for help.
Author	Dominik Schnabelrauch
Public	Não

Pré-requisitos de guia

• Nº 1 era empty, mas agora é Opening Procedure.

Ferramentas

Sinalizadores

Passos

Passo nº: 1

Antes

Depois

Passo nº: 2

Antes

Depois

Passo nº: 3

Antes

Depois

Passo nº: 4

Antes

Depois

Passo nº: 5

Antes

Depois

Passo nº: 6

Antes

Depois