| To reassemble your device, follow these instructions in reverse order. |
| The steps for other vanmoof bikes should be similar. For an X2, I see no issue. You definitely areg going to want to check all of my measurements to make sure it uses the same dropout spacing. I think it should but I’d double check. Also your ERD is gonna be different so you will need to measure that on your own but if you can do that, it should be a similar process. |
|
| The S3 and X3, I’m not as sure of. I think it should be possible as long as vanmoof allows you to just leave the e-shifter unplugged as [link|https://www.reddit.com/r/vanmoofbicycle/comments/uwmx4n/comment/i9y5x4i/?utm_source=share&utm_medium=web2x&context=3|this redditor pointed ou|new_window=true]t. Someone might want to test this though. Maybe just unplug the shifter and ride around for a bit and see if it complains. |
|
| If you end up doing the project, please let me know how it goes. Let me know if its possible with an S3/X3 and send me the ERD you get so I can update the article with measurements for all the bikes |