Histórico da introdução: Vanmoof Electrified S2 Rear Hub Upgrade

Edição por Coleman Oei — 17 de jul de 2022

Edição aprovada por Coleman Oei

Shifter Cable Housing x1 depending on what hub you chose and what shifting set up you chose, you might not need this or need something slightly different added.
Enviolo CVP Internally Geared Hub: City 36 Hole Disc Brake x1 You do not need this exact hub. This is just what I used. Check the article for more details on picking a hub added.
Enviolo twist shifter x1 Depends on your hub set up. figure out what works for your set up. This is what I used added.
Enviolo Manual CVP Hub Interface: CT%2FCO%2FTR x1 depends on your hub set up. figure out what works for your set up. This is what I used added.
Enviolo CVP Standard Mounting Hardware Kit: CT CO TR x1 depends on your hub set up. figure out what works for your set up. This is what I used added.
Enviolo Sprocket: 16 Tooth, 3/32", Flat, Nickel Plated Cog x1 Depends on your set up and what gear ratio range you want. (Read more about it in the article) 16T is what I felt comfortable at. added.
FW4671 Shimano Dura-Ace CS-7800 Ultegra CS-6600 10-Speed Low Spacer x2 This is only needed if you are using the 16T cog on the enviolo hub. Otherwise the mounting hardware comes with the correct spacers added.
DT Swiss Champion 14 Gauge Black Spokes - 2.0 x 254 mm x36 This is the length I used but mine were slightly short so get 1-2mm longer if you are using the exact same hub and rim added.
DT SWISS BLACK 14G 12MM BRASS NIPPLE x1 get correct gauge nipple for the spokes you bought. These are 14 G to match the 14 gauge spokes added.