Ir para o conteúdo principal

Alterações na iPad mini 5 Wi-Fi Power Button Cable Replacement Introdução

Edição por Kyle Smith

Edição aprovada por Kyle Smith

Sem alteração
Follow this guide to remove or replace the power button on an iPad mini 5 Wi-Fi.
Note that this guide is for replacing the power button cable and switch, not the external power button face.
'''For your safety, discharge the battery below 25% before disassembling your device.''' This reduces the risk of a dangerous thermal event if the battery is accidentally damaged during the repair. If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]].
Time Required Min
1 hora
Time Required Max
2 horas
To reassemble your device, follow these instructions in reverse order.
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
'''To reassemble your device, follow these instructions in reverse order.'''
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link||iPad mini 5 Answers community] for help.

Pré-requisitos de Guia


  • iOpener x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • Suction Handle x1 added.
  • Phillips #00 Screwdriver x1 added.
  • Spudger x1 added.
  • Tweezers x1 added.


  • iPad mini 5 Power Button Cable x1 added.
  • Precut Adhesive Card x1 added.