|
Introduction |
Use this guide to remove and replace the front camera assembly (a.k.a. selfie cam) in an iPhone 12.
Note that if***Note:*** If you replace this part, '''***Face ID will no longer work'''***. This repair will restore a broken selfie cam to working order, but on iOS 17.6 and earlier, only Apple or an Apple “authorized” technician can restore Face ID. On iOS 18 and newer, you can recalibrate new, genuine front-facing cameras using Apple's [link|https://support.apple.com/en-us/120579|Repair Assistant|new_window=true]. |
|
|
Conclusion |
| Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing. | | | ***To reassemble your device, follow the above steps in reverse order.*** | | | After your repair, depending on the replacement part, you may be able to [link|https://support.apple.com/en-us/120579|calibrate it using Apple's Repair Assistant|new_window=true], available as of iOS 18. Update your device, navigate to Settings ***→*** General ***→*** About ***→*** Parts & Service History, tap Restart & Finish Repair, and follow the onscreen prompts. | | | Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]]. | | | Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/iPhone%2012|iPhone 12 Answers community] for help. |
|