|
Introduction |
Use this guide to replace a worn-out or dead battery in your Apple Watch Series 34. | | This guide shows the procedure on the standard, GPS-only version of the watch, but the cellular/LTE version is similar. Any important differences are noted in'''For your safety, discharge your battery below 25% before disassembling your Apple Watch.''' This reduces thetext risk of a dangerous thermal event if the battery is accidentally damaged during the repair. | | | Note: If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions]]. | | | During the display opening procedure of the Apple Watch it is likely to damage the force touch gasket. If you separate the gasket layers or cut the cable, you'll also need to replace the Force Touch gasket itself. | | | You’ll need '''replacement adhesive''' to reattach components when reassembling the device. |
|