Ir para o conteúdo principal

Alterações na Dirt Devil Vibe Vacuum Brush Roller Replacement Introdução

Edição por Sarah Westberg

Edição aprovada por Sarah Westberg

Antes
Depois
Sem alteração
dispositivo
Dirt Devil Vibe Vacuum
Introduction
When the brush on your vacuum gets clogged with debris, it may become ineffective. Use this guide to replace the brush roller on your Dirt Devil Vibe vacuum. Consumers can save money and their time by learning how to repair the brush of the vacuum by viewing and following our guidelines.
Conclusion
To reassemble your device, follow these instructions in reverse order.
# ''Turn off the vacuum, flip the appliance over (in order to get a visual)''
# Use a 5 Inch #0 (3mm) Phillips Head Screwdriver to unscrew each screw
# ''Remove bottom case''
# ''Pull brush roll out of case to remove''
# ''Install a new brush''
# ''Screw on screws to close the case''
Summary
Consumers can save money and their time by learning how to repair the brush of the vacuum by viewing and following our guidelines.
Use this guide to replace the brush roller on your Dirt Devil Vibe vacuum.

Sinalizadores

  • Better Introduction added.