Ir para o conteúdo principal

Alterações na iPad Pro 10.5" Home Button Replacement Introdução

Edição por Dominik Schnabelrauch

Edição aprovada por Dominik Schnabelrauch

Antes
Depois
Sem alteração
dispositivo
iPad Pro 10.5"
Type
replacement
Thing
Home Button
Title
iPad Pro 10.5" Home Button Replacement
Introduction
Use this guide to replace a broken or to transfer your home button in the 10.5” iPad Pro.
The fingerprint scanner in the home button is paired to the iPad's logic board. In order to maintain Touch ID functionality, you must transfer your original home button to the new display assembly.
You’ll need '''replacement adhesive''' to reattach components when reassembling the device.
Time Required Min
30 minutos
Time Required Max
1 hora
Imageid
Antes
Depois
Difficulty
Moderate
Conclusion
Compare your new replacement part to the original part. You may need to transfer remaining components or remove adhesive backings from the new part before installing. To reassemble your device, follow this guide in reverse order. [[E-Waste|Take your e-waste to an R2 or e-Stewards certified recycler|new_window=true]]. Repair didn’t go as planned? Check out our Answers community for troubleshooting help.
Author
Public
Não
Summary
This guide shows how to replace the home button in the 10.5" iPad Pro.

Pré-requisitos de Guia

Ferramentas

  • Suction Handle x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • Battery Blocker x1 added.
  • SIM Card Eject Tool x1 added.
  • Phillips #000 Screwdriver x1 added.
  • iOpener x1 added.
  • Tweezers x1 added.
  • Spudger x1 added.
  • Halberd Spudger x1 added.

Peças

  • iPad Pro 10.5" Adhesive Strips x1 added.

Sinalizadores

  • In Progress added.