Ir para o conteúdo principal

Alterações na iPad Pro 10.5" Home Button Replacement Introdução

Edição por Jeff Suovanen

Edição aprovada por Jeff Suovanen

Antes
Depois
Sem alteração
Introduction
Use this guide to replace a defective home button or to transfer the home button in the 10.5” iPad Pro ononto a new display assembly.
'''Replacing the home button will not restore Touch ID function. The Touch ID fingerprint scanner in the home button is paired to the iPad's logic board.''' In order to maintain Touch ID functionality, if you replace the screen, you must carefully transfer your original home button to the new display assembly.
You’ll need '''replacement adhesive''' to reattach components when reassembling the device.
Time Required Max
2 horas
3 horas
Imageid
Antes
Depois
Difficulty
Moderate
Difficult
Conclusion
Compare your new replacement part to the original part. You may need to transfer remaining components or remove adhesive backings from the new part before installing.

'''To reassemble your device, follow this guide in reverse order. '''

[[E-Waste|Take your e-waste to an R2 or e-Stewards certified recycler|new_window=true]].

Repair didn’t go as planned? Check out our [https://www.ifixit.com/Answers/Device/iPad%20Pro%2010.5%22|Answers community] for troubleshooting help.

Ferramentas

  • Phillips #00 Screwdriver x1 added.
  • Isopropyl Alcohol x1 added.
  • Phillips #000 Screwdriver x1 removed.

Peças

  • Tesa 61395 Tape x1 added.