Skip to main content

Changes to iPod Touch 5th Generation Button Ribbon Cable Replacement Introduction

Edição por Andrew Optimus Goldheart

Edição aprovada by Andrew Optimus Goldheart

Excluído
Adicionado
Sem alteração
Introduction
[ ]The button ribbon cable connects the power/sleep button, volume buttons, LED flash, light sensor, and microphone to the logic board. If any one of these components fail, you'll have to replace the entire cable. Use this guide to do just that.
Imageid
Antes
Depois
Summary
[ ]Remove the button ribbon cable from your iPod Touch 5th Generation.

Pré-requisitos de Guia

Ferramentas

  • Heavy-Duty Suction Cups (Pair) x1 added.
  • Phillips #00 Screwdriver x1 added.
  • iFixit Opening Tools x1 added.
  • Spudger x1 added.
  • Tweezers x1 added.