Ir para o conteúdo principal

Alterações na Shark IONFlex 2X Brush Roll Band Replacement Introdução

Edição por Eric Dean

Edição aprovada por Eric Dean

Antes
Depois
Sem alteração
Introduction
This replacement guide uses a metal spudger, T20 Torx screwdriver, and a large plastic pryopening tool. This guide will show the user how to open the device casing, access the brush roll band, and replace the band.

CAUTION: Use care when using the metal spudger, as the edges of the tool are sharp and can cut you if you are not careful.