Ir para o conteúdo principal

Fix Your Stuff

Right to Repair

Parts & Tools

Alterações na iPhone XR Earpiece and Front Sensor Assembly Replacement Introdução

Edição por Adam O'Camb

Edição aprovada de Adam O'Camb

Excluído
Adicionado
Sem alteração
dispositivo
[ ]iPhone XR
Type
[ ]replacement
Thing
[ ]Earpiece and Front Sensor Assembly
Title
[ ]iPhone XR Earpiece and Front Sensor Assembly Replacement
Introduction
Follow the steps in this guide to remove, transfer, and/or replace the earpiece speaker and front sensor assembly in your iPhone XR. This assembly includes the earpiece speaker, microphone, ambient light sensor, flood illuminator, and proximity sensor. [ … ] '''This assembly is paired to your individual iPhone from the factory''', so you must transfer it from your old display to your new one during any display replacement. [ … ] The flood illuminator forms part of the biometric [https://support.apple.com/en-us/HT208108|Face ID] security feature, and Face ID functions will fail if the original component is damaged or incorrectly installed. Replacing it with a new part will also cause Face ID to fail, so take extra care not to damage any of these components during this procedure. If damaged, only Apple can restore Face ID function.
Time Required Min
1 hora
Time Required Max
2 horas
Imageid
Antes
Depois
Difficulty
Moderate
Conclusion
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing. [ … ] '''To reassemble your device, follow the above steps in reverse order.''' [ … ] Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]]. [ … ] Repair didn’t go as planned? Check out our [https://www.ifixit.com/Answers/Device/iPhone%20XR|Answers community] for troubleshooting help.
Author
Public
Não
Summary
[ ]Remove or replace the earpiece speaker assembly in an iPhone XR—including the flood illuminator, proximity sensor, ambient light sensor, and microphone.

Pré-requisitos de Guia

Ferramentas

  • P2 Pentalobe Screwdriver iPhone x1 added.
  • iOpener x1 added.
  • iFixit Opening Picks set of 6 x1 added.
  • Suction Handle x1 added.
  • iSclack x1 added.
  • Tri-point Y000 Screwdriver Bit x1 added.
  • Phillips PH000 Screwdriver x1 added.
  • Spudger x1 added.
  • Tweezers x1 added.

Sinalizadores

  • In Progress added.

Passos

Step #: 1
Antes
Depois
Step #: 2
Antes
Depois
Step #: 3
Antes
Depois
Step #: 4
Antes
Depois
Step #: 5
Antes
Depois
Step #: 6
Antes
Depois
Step #: 7
Antes
Depois
Step #: 8
Antes
Depois
Step #: 9
Antes
Depois