Ir para o conteúdo principal

Alterações na Making a low cost light stand for Photography Introdução

Edição por Nick

Edição aprovada de Nick

Excluído
Adicionado
Sem alteração
Title
to Make make a light stand for Photography
to Make make a light stand for Photography
Introduction
take an old/cheap a standing lamp to create a stand. convert it just for this task. This guide will show you how to disassemble a common style lamps lamp, and which help you identify reusable components can be salvaged for other projects you may do in the future. This projects. '''''Read me: This is not the best stand you can get as modifications may be required, but many of these lamps can be had for next to nothing because they are unwanted or need a shade that costs more than a new lamp. and hard to get rid of.''''' This can be advantageous if you need a low-cost stand and are willing to disassemble one. === one to eliminate the redundant components. == Guide notes === == * '''''Use common sense during the cord and socket removal procedure. Death or injury may occur if you make a mistake!''''' mistake, as you are handing 120-240V AC!''''' * Make sure you use a lamp that you are certain you do not plan on reassembling. reassembling or is missing parts that cannot be readily purchased. Post disassembly reversal may be impossible or impractical, especially if you used a broken lamp that needed other parts. parts and modified the lamp to accept other lamps if yours fails or you need to use something else. * If possible, use a lamp with a dangerous problem like a busted socket guard cover. cover, as the one in this guide had a problem with. The one I used in this guide cracked and was supported with electrical tape. tape until it was pulled out of service due to redundancy. These are the best candidate for this project. type of project, as they cannot be used without major repairs and the cost often exceeds a similar lamp brand new. * While the plastic parts on many of these lamps are may not (easily) reusable due to their installation technique from the factory (and often, uniqueness), the socket and cord can be easily reused. These should be saved for another project. project if they are in good condition and do not appear to be damaged. * '''''DO NOT keep any part that looks damaged. Consider these parts garbage for good measure.'''''
take an old/cheap a standing lamp to create a stand. convert it just for this task. This guide will show you how to disassemble a common style lamps lamp, and which help you identify reusable components can be salvaged for other projects you may do in the future. This projects. '''''Read me: This is not the best stand you can get as modifications may be required, but many of these lamps can be had for next to nothing because they are unwanted or need a shade that costs more than a new lamp. and hard to get rid of.''''' This can be advantageous if you need a low-cost stand and are willing to disassemble one. === one to eliminate the redundant components. == Guide notes === == * '''''Use common sense during the cord and socket removal procedure. Death or injury may occur if you make a mistake!''''' mistake, as you are handing 120-240V AC!''''' * Make sure you use a lamp that you are certain you do not plan on reassembling. reassembling or is missing parts that cannot be readily purchased. Post disassembly reversal may be impossible or impractical, especially if you used a broken lamp that needed other parts. parts and modified the lamp to accept other lamps if yours fails or you need to use something else. * If possible, use a lamp with a dangerous problem like a busted socket guard cover. cover, as the one in this guide had a problem with. The one I used in this guide cracked and was supported with electrical tape. tape until it was pulled out of service due to redundancy. These are the best candidate for this project. type of project, as they cannot be used without major repairs and the cost often exceeds a similar lamp brand new. * While the plastic parts on many of these lamps are may not (easily) reusable due to their installation technique from the factory (and often, uniqueness), the socket and cord can be easily reused. These should be saved for another project. project if they are in good condition and do not appear to be damaged. * '''''DO NOT keep any part that looks damaged. Consider these parts garbage for good measure.'''''

Ferramentas

  • 64 Bit Driver Kit x1 Use Phillips #2 bit. Used on screw sockets. Substitutable with a drill and Phillips #2 bit. (featured) added.
  • Phillips #2 Screwdriver x1 Used on screw sockets. Substitutable with a drill and Phillips #2 bit. (featured) removed.

Peças

  • Broken lamp x1 Found at houses, yard sales and thrift stores. (featured) added.
  • Broken lamp x1 Found at hoses, yard sales and thrift stores. (featured) removed.