Skip to main content

Changes to Making a low cost light stand for Photography Introduction

Edição por Nick

Edição aprovada by Nick

Excluído
Adicionado
Sem alteração
Introduction
[ ]If you need a light stand for photos, this guide will show you how to take an old/cheap standing lamp to create a stand. This guide will show you how to disassemble common style lamps and which components can be salvaged for other projects you may do in the future. This is not the best stand you can get as modifications may be required, but many of these can be had for next to nothing because they are unwanted or need a shade that costs more than a new lamp. This can be advantageous if you need a low cost stand and are willing to disassemble one.

Ferramentas

  • Phillips #2 Screwdriver x1 Used on screw sockets. Substitutable with a drill and Phillips #2 bit. (featured) added.
  • Phillips #2 Screwdriver x1 Used on screw sockets. removed.