Ir para o conteúdo principal

Alterações na Moto Z Display Assembly Replacement Introdução

Edição por Sam Goldheart

Edição aprovada por Sam Goldheart

Antes
Depois
Sem alteração
Introduction
Prereq guide only. Used in conjunction with home button prereq.
This guide shows how to replace a broken or cracked display assembly for the Moto Z. The display assembly includes the front glass and the AMOLED display.
'''The display assembly is extremely fragile and has no reinforcement.''' Work slowly and methodically when handling the display assembly.
If your display glass is cracked, keep further breakage contained and prevent bodily harm during your repair by taping over the glass.
Prereq to open the phone and remove the screen.
Conclusion
Compare your new replacement part to the original part. You may need to transfer remaining components or remove adhesive backings from the new part before installing.
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Check out our [https://www.ifixit.com/Answers/Device/Moto%20Z|Motorola Moto Z Answers community] for troubleshooting help.
Summary
Prereq guide only. Follow this guide to replace the display assembly for your Motorola Moto Z.
Prereq to open the phone and remove the screen.

Peças

  • Moto Z Screen x1 removed.
  • Motorola Moto Z Display Adhesive x1 removed.