Ir para o conteúdo principal

Alterações na Moto Z Display Assembly Replacement Introdução

Edição por Arthur Shi

Edição aprovada por Arthur Shi

Antes
Depois
Sem alteração
Introduction
This guide shows how to replace the entire display assembly for the Moto Z. The display assembly includes the front glass and the AMOLED display.
Note: The display assembly ishas an unreinforced back and is therefore extremely fragile and prone to cracking.
Time Required Min
35 minutos
Time Required Max
1 hora
Imageid
Antes
Depois
Conclusion
Compare your new replacement part to the original part. You may need to transfer remaining components or remove adhesive backings from the new part before installing.
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Check out our [https://www.ifixit.com/Answers/Device/Moto%20Z|Motorola Moto Z Answers community] for troubleshooting help.

Ferramentas

  • iOpener x1 added.
  • Suction Handle x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • Spudger x1 added.
  • Tweezers x1 added.