Ir para o conteúdo principal

Alterações na iPhone 8 Taptic Engine Replacement Introdução

Edição por Arthur Shi

Edição aprovada por Arthur Shi

Antes
Depois
Sem alteração
dispositivo
iPhone 8
Type
replacement
Thing
Taptic Engine
Title
iPhone 8 Taptic Engine Replacement
Introduction
The Taptic Engine produces your iPhone's vibration and haptic feedback functions. Use this guide to remove and/or replace the Taptic Engine in an iPhone 8.
'''Note:''' This guide instructs you to fully detach and remove the display assembly; this is intended to make the phone easier to work with and to prevent accidental damage to the display cables. If you feel comfortable removing the Taptic Engine while keeping the display cables attached, you can skip the display removal steps.
Time Required Min
40 minutos
Time Required Max
1 hora
Difficulty
Moderate
Conclusion
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
'''To reassemble your device, follow the above steps in reverse order.'''
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Check out our [https://www.ifixit.com/Answers/Device/iPhone%208%20Plus|Answers community] for troubleshooting help.
Author
Public
Não
Summary
Replace the Taptic Engine in an iPhone 8.

Pré-requisitos de Guia

Ferramentas

  • P2 Pentalobe Screwdriver iPhone x1 added.
  • Suction Handle x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • iOpener x1 added.
  • Spudger x1 added.
  • Tweezers x1 added.
  • Phillips #000 Screwdriver x1 added.

Sinalizadores

  • In Progress added.

Passos

Step #: 1
Antes
Depois