Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações na iPhone 8 Plus Home/Touch ID Sensor Replacement Introdução

Edição por Jeff Suovanen

Edição aprovada por Jeff Suovanen

Antes
Depois
Sem alteração
dispositivo
[ … ]iPhone 8 Plus
Type
[ … ]replacement
Thing
[ … ]Home/Touch ID Sensor
Title
[ … ]iPhone 8 Plus Home/Touch ID Sensor Replacement
Introduction
Prerequisite only. [ … ] '''Only Apple can do a home button swap.''' If you replace yours using 3rd-party parts, it deactivates the button and turns on assistive touch. Therefore this procedure is only useful as part of a display assembly replacement, where the home/Touch ID sensor must be transferred from the old display to the new one. [ … ] Follow the steps in this guide to remove or transfer the home/Touch ID sensor assembly, including the gasket and cable, in your iPhone 8 Plus. To avoid accidentally straining or tearing the display cables, it's best to completely detach the display assembly before beginning repairs on the home/Touch ID sensor. But if you are comfortable doing so, you may skip the display assembly section of this guide and go straight to the home/Touch ID sensor section.
Time Required Min
Nenhuma estimativa
Time Required Max
Nenhuma estimativa
Imageid
Antes
Depois
Difficulty
Moderate
Conclusion
[ … ]To reassemble your device, follow these instructions in reverse order.
Author
Public
Não
Summary
[ … ]Replace the solid-state home button in your iPhone 8 Plus.

Ferramentas

  • Tri-point Y000 Screwdriver x1 added.
  • Tweezers x1 added.
  • iFixit Opening Picks set of 6 x1 added.
  • iOpener x1 added.
  • iFixit Opening Tools x1 added.
  • Spudger x1 added.

Sinalizadores

  • In Progress added.
  • Prerequisite Only added.

Passos

Step #: 1
Antes
Depois
Step #: 2
Antes
Depois
Step #: 3
Antes
Depois
Step #: 4
Antes
Depois
Step #: 5
Antes
Depois
Step #: 6
Antes
Depois